Submenu_Locking

Ameriloc Internal Locking Devices

	MODEL 3003 Locking Assembly, consisting of internally slotted bush and externally slotted ring. These are clamped together by locking screws, thus mating the shaft with the bore of the hub. High degree of concentricity. Removal by means of jacking screws.
	MODEL 3006 When compared with the model 3003, the difference is the larger flange of the internal bush, preventing axial movements of shaft and hub.
	MODEL 3012, MODEL 3015 Higher torque transmission values than for models 3003 and 3006. Additionally, collar on the inner face of the external bush results in shorter fitting and removal time. MODEL RB Especially for conveyor pulleys (with low surface pressure).
	MODEL 3020 Two tapered rings are locked together by screws forcing one slotted internal and one slotted external ring against the respective shaft and hub surfaces. Machining tolerances are loosened to allow for greater range of fit. Removal is simple as the cone angles prevent binding. For the transmission of higher torque values several locking assemblies can be used in series.

For detailed product information, visit www.ameriloc.com

Ameridrives internal locking devices are offered in a wide range of sizes for use on all types of industrial applications including: